# /etc/inittab
#
# Copyright (C) 2001 Erik Andersen <andersen@codepoet.org>
#
# Note: BusyBox init doesn't support runlevels.  The runlevels field is
# completely ignored by BusyBox init. If you want runlevels, use
# sysvinit.
#
# Format for each entry: <id>:<runlevels>:<action>:<process>
#
# id        == tty to run on, or empty for /dev/console
# runlevels == ignored
# action    == one of sysinit, respawn, askfirst, wait, and once
# process   == program to run

# Startup the system
::sysinit:/bin/mount -t proc proc /proc
::sysinit:/bin/mount -o remount,rw /
#::sysinit:/bin/mkdir -p /dev/pts
#::sysinit:/sbin/ifconfig eth0 191.167.1.20
#::sysinit:/sbin/ifconfig eth1 192.168.1.21
#::sysinit:/sbin/route del -net 192.168.1.0 gw 0.0.0.0 netmask 255.255.255.0 eth0
::sysinit:/bin/mount -a
::sysinit:/bin/hostname -F /etc/hostname
# now run any rc scripts
::sysinit:/etc/init.d/rcS
#::wait:/etc/init.d/rc 2

# Set up a couple of getty's
#tty1::respawn:/sbin/getty 38400 tty1
#tty2::respawn:/sbin/getty 38400 tty2

# Put a getty on the serial port
#ttyS0::respawn:/sbin/getty -L 115200 ttyS0 vt100 # GENERIC_SERIAL

# Logging junk
#::sysinit:/bin/touch /var/log/messages
#::respawn:/sbin/syslogd -n -m 0
#::respawn:/sbin/klogd -n
#tty3::respawn:/usr/bin/tail -f /var/log/messages

# Stuff to do for the 3-finger salute
::ctrlaltdel:/sbin/reboot

# Stuff to do before rebooting
null::shutdown:/usr/bin/killall klogd
null::shutdown:/usr/bin/killall syslogd
null::shutdown:/bin/umount -a -r
null::shutdown:/sbin/swapoff -a

ttyS0::askfirst:/bin/ash
ttyS1::askfirst:/bin/ash